Self-bonding Wire Enamel
| Product | Chemical Component | Heat levels | Solid Content | Viscosity | Bonding Method | Coating method | Bonding conditions | Conductor Diameter(mm) | Applications | Characteristics | |
| 180℃/1g/1h | S(T-4#/30℃) | mpa.s (Rotational viscometer/30℃) |
|||||||||
| JCB-B | Modified PA | B | 8-16 | 25-90 | Bonding by alcohol | F/D | 0.02-1.00 | Universal Wire | Thermoplastic, Universal | ||
| JCB-B23G | Modified PA | B | 8-10 | 25-35 | Bonding by alcohol | F | 0.02-0.10mm | Thermoset,Have a good initial tack | |||
| JCB-F | Modified PA | F | 8-14 | 25-80 | Bonding by alcohol | F/D | 180℃×30min | 0.02-0.20mm | Higher heat levels common wire | Thermoset,Have a high heat level | |
| JCB-H | Modified PA | H | 8-16 | 25-100 | Bonding by alcohol | F/D | 180℃×30min | 0.10-0.50mm | High heat levels voice coil wire | Thermoset,Have a high heat level | |
| JCB-HG | Modified PA | H | 8-18 | 25-140 | Bonding by alcohol | F/D | 180-190℃×30min | 0.02-0.60mm | High heat levels voice coil wire and UTV coil wire | Thermoset,Have a high heat level | |
| JCB-HL | Modified PA | H | 8-12 | 25-50 | Bonding by alcohol | F | 180℃×30min | 0.02-0.15mm | High heat levels voice coil wire | Thermoset,Have a high heat levelfor micro-wire | |
| NV-14W | Modified PA | H | 13-15 | 150-200 | Bonding by alcohol | F/D | 190-200℃×30min | 0.05-0.30mm | High heat levels voice coil wire | Thermoset,Have a high heat level | |
| NV-22W | Modified PA | H | 20-22 | 700-900 | Bonding by alcohol | D | 190-200℃×30min | 0.20-0.60mm | High heat levels voice coil wire | Thermoset,Have a high heat level | |
| RA-14JW | Modified PA | C | 13-15 | 150-250 | Bonding by alcohol | F/D | 190-210℃×30min | 0.05-0.30mm | High grade heat levels voice coil wire | Thermoset,Have a high heat level | |
| RA-22JW | Modified PA | C | 20-22 | 800-1000 | Bonding by alcohol | D | 190-210℃×30min | 0.20-0.60mm | High grade heat levels voice coil wire | Thermoset,Have a high heat level | |
| JMZ-4 | Modified PVB | A-E | 9-11 | 20-30 | Bonding by alcohol or hot air | F | 140-170℃×10min | 0.02-0.15mm | Magnetic coil wire, both solvent and hot melt adhesive properties | Thermoplastic, hot air compatible | |
| JY1G | Modified PA | Y | 8-10 | 50-90 | Hot air or electricity | F | 120-140℃×10min | 0.02-0.15mm | Special self-bonding wire | Half thermoset,bonding by low temperature | |
| JY2G | Modified PA | A-E | 8-10 | 50-80 | Hot air or electricity | F | 130-150℃×10min | 0.02-0.15mm | Special self-bonding wire | Half thermoset,bonding by low temperature | |
| JY3G | Modified PA | E-B | 8-15 | 22-110 | Hot air or electricity | F/D | 150-160℃×10min | 0.02-0.30mm | Special self-bonding wire | Half thermoset | |
| JY3-1 | Modified PA | E-B | 8-10 | 45-60 | Hot air or electricity | F | 150-160℃×10min | 0.02-0.15mm | Special self-bonding wire | Thermoplastic, Universal | |
| JY3-L | Modified PA | E-B | 9-11 | 25-30 | Hot air or electricity | F | 140-150℃×10min | 0.02-0.15mm | Special self-bonding wire | Half thermoset,bonding by low temperature | |
| JY4G | Modified PA | B | 8-10 | 45-60 | Hot air or electricity | F | 150-170℃×10min | 0.02-0.15mm | Special self-bonding wire | Half thermoset | |
| JY5G | Modified PA | B-F | 8-16 | 50-600 | Hot air or electricity | F/D | 160-170℃×10min | 0.02-0.30mm | Special self-bonding wire | Half thermoset, Heat resistance | |
| JY5-B | Modified PA | B | 9-11 | 28-36 | Hot air or electricity | F | 160-180℃×10min | 0.02-0.15mm | Special self-bonding wire | Thermoplastic | |
| JY5-N | Modified PA | B | 8-14 | 80-400 | Hot air or electricity | F/D | 160-170℃×10min | 0.02-0.30mm | Special self-bonding wire | Thermoplastic, Universal | |
| JY7G | Modified PA | F | 12-16 | 100-400 | Hot air or electricity | F/D | 170-200℃×10min | 0.02-0.30mm | Special self-bonding wire | Half thermoset, Heat resistance | |
| JY9G | Modified PA | H | 8-10 | 45-60 | Hot air or electricity | F | 180-210℃×10min | 0.02-0.15mm | Special self-bonding wire | 半热固性、较高耐热性 | |
| JY20G | Modified PA | H | 8-10 | 50-100 | Hot air or electricity | F | 200-230℃×10min | 0.02-0.15mm | Special self-bonding wire | Half thermoset, Have a high heat level | |
| UE-1 | Modified UE | Y | 9-11 | 45-55 | Hot air or electricity | F | 130-150℃×10min | 0.02-0.15mm | Special self-bonding wire | Anti-wet tack | |
| UE-2 | Modified UE | Y | 9-11 | 45-55 | Hot air or electricity | F | 120-150℃×10min | 0.02-0.15mm | Special self-bonding wire | Anti-wet tack | |
| JRB-B1 | Modified PA | H | 15-20 | 800-1800 | Hot air or electricity | D | 190-220℃×10min | 0.15-0.50mm | High heat levels self-bonding wire | Thermoset,Have a heat level | |
| JRB-H(A) | Specialty Polymers | C | 23-25 | 1200-1600 | Hot air or electricity | D | 210-230℃/30min | 0.20-0.60mm | High heat levels coil wire | Half thermoset, Have a high heat level, Chemical resistance | |
| JRB-BT | PVB | A | 10-12 | 50-70 | Hot air or electricity | F | 140-170℃×10min | 0.05-0.50mm | Motor coil and the electronic appliances coil wire | Half thermoset , Universal | |
| JEP-1L | Epoxy | B | 19-21 | 800-1300 | Heat-bonding | D | 120-130℃×24h | Self-bonding flat wire of CTC | Fine leveling property | ||
| JEP-2 | Epoxy | F | 13-15 | 40-60 | Hot air or electricity | D | 140-170℃×30min | Motor coil wire | Half thermoset, Heat resistance | ||
| JEP-NR | Modified Epoxy | F | 40-60 | 1000-2000 | Heat-bonding | D | 120-130℃×24h | Heat levels self-bonding flat wire of CTC | Thermoset,Have a high heat level | ||
| Type of JY | You can select a variety of temperatures needed paint adhesion properties, excellent adhesion properties, low moisture absorption, high hardness after coil molding, and metal divorced good, shaping wire low odor, mainly used for vibration motor coil wire, special motor wire voice coil manufacturing. G suffix with thermoset hot melt adhesive paint. | ||||||||||
| JRB-HA | It have a Higher re-soften temperature than conventional aromatic nylon and better adhesive properties, finished the wire after 210-230 ℃ / 30min curing adhesive, physical and chemical methods to test and then the softening temperature ≥220 ℃, It can made for the special electrical coil wires manufacturing requirements. | ||||||||||
| JEP-NR | Bonding by two-step method curing techonlogy route, after the formation of the secondary cured thermosetting structure, chemical resistance, at operating temperature of 120℃, the bonding strength over 6N/mm2 Between the wires, can be synchronized | ||||||||||
| Type of JCB | JCB series have good Alcohol solubility, fast drying and high bond strength, resistance to wet tack, can be cured with a primer (polyurethane) with the furnace. For the production of heat-resistant grades of electrical wire and radio spiral voice coil wire, such as: voice coil, vibration motors, coils and other skeleton watches coil wire. | ||||||||||
| Type of RA | It is compounded by alcohol polyamide resin with high heat level resin, and its heat resistance reaches H level and above; also has good adhesive properties and storage stability. Used in various heat (high power) for producing acoustic wire. | ||||||||||
Voice coil spirit glue
| Product | Chemical Component | Heat levels | Solid Content | Viscosity | Bonding Method | Bonding Conditions | Applications | Characteristics | |
| 180℃/1g/1h | S(T-4#/30℃) | mpa.s (Rotational viscometer/30℃) |
|||||||
| JYB-B1 | Modified PA | B | 17-19 | 40-90 | Alcohol solvents | Coating for paper | Thermoplastic | ||
| JYB-B2 | Modified PA | B | 17-19 | 40-90 | Alcohol solvents | Coating for high grade reinforced paper | Thermoplastic | ||
| JYB-B3 | Modified PA | B | 15-18 | 80-100 | Alcohol solvents | Aluminum foil LOCK coating | Thermoplastic | ||
| JYB-HK | Modified PA | H | 15-18 | 80-100 | Alcohol solvents | 180-200℃/30min | Coating for Aluminimu foil | Thermoset | |
| JYB-H(FJ) | Modified PA | H | 20-25 | 50-80 | Alcohol solvents | 180-200℃/30min | Coating for Aluminimu foil | Thermoset, Have a heat level | |
| JYB-H(KJ) | Modified PA | H | 15-18 | 50-80 | Alcohol solvents | 180-200℃/30min | Coating Kapton volumes | Thermoset, High bonding strength | |
| NV-16B | H | 12-17 | 100-400 | Alcohol solvents | 180-200℃/31min | Coating for Aluminimu foil | Thermoset, Have a heat level | ||
| NV-12B | H | 11-13 | 30-50 | Alcohol solvents | 180-200℃/32min | Coating for Aluminimu foil | Thermoset, Have a heat level | ||
| RA-17JB | C | 15-18 | 100-400 | Alcohol solvents | 190-210℃/30min | Coating for Aluminimu foil | Thermoset, Have a high heat level | ||
| HTEP-2 | H | 50 | 45-50 | 280-350 | Coating surface of the TIL insulating layer | Thermoset, Have a heat level | |||
| White Glue / Blue Glue | Specialty Polymers | F | 20-25 | 150-200 | Fixing leading-out wire of voice coil | Thermoplastic, High bonding strength | |||
| Type of JYB | This series have good alcohol-soluble bond feature, have different high heat levels, could be applied in match with alcohol-soluble enamel wires, and have good leveling property of gluing. They are used for surface coatings on materials of voice coil paper, aluminum foil, kapton and so on. | ||||||||
| Type of RA | It has a very high heat levels,together with RA self bonding wire. | ||||||||
| Type of NV | Together with NV self-bongding wire. | ||||||||
Insulating varnish
| Product | Chemical Component | Heat levels | Solid Content | Viscosity | Coating method | Applications | |
| 180℃/1g/1h | S(T-4#/30℃) | mpa.s (Rotational viscometer/30℃) |
|||||
| JZN-8 | Modified PA | F | 7-9 | 22-26 | F | Reinforcement coating for UEW, PEW and other wire, reduce the friction coefficient | |
| JZN-11 | Modified PA | F | 9-11 | 35-45 | D | Reinforcement coating for UEW, PEW and other wire, reduce the friction coefficient | |
| JQ-6M | Polyvinyl acetal | E | ≥20 | 2000-5000 | D | Transposition wire | |
| JQ-5 | Polyvinyl acetal | E | ≥20 | 2000-5000 | D | Excellent performance on the paint film flexibility | |
| Type of JZN | This series are modified from polyamide resin, have low friction coefficient and excellent lubricating property, and could be solidified with all kinds of base coat in the same stove. They are used for all kinds of coil wires that are adapted to high-speed winding and of good electrical feature. | ||||||
| Type of JQ | This series’ main film forming materials are PVF and high heat cured resin. After coating, the film will have good adhesiveness and oil and water resistance, need high temperature for heat shocking and cut-through, and have wide workmanship range. They are widely used for winding coil wires on oil-immersed transformer, mutual inductor and so on. | ||||||
※ Above data is experimental data tested under certain conditions by our company and will change and varies under various conditions. So they could not be considered as the basis for product quality assurance.
※ Technic parameters could be adjusted according to clients’ requirements.